| 1. |
Maliha, M., Chu, H., Nishiwaki, T., & Amin, A. F. M. S. (2020). Effect of surface roughness on non-destructive tests for Screening of low-strength concrete. In 17th World Conference on Earthquake Engineering, 17WCEE. Sendai, Japan. |
| 2. |
Saha, N., Sanada, Y., Takahashi, S., Rahman, M. M., Amin, A. F. M. S. (2020). Investigation on tensile and shear capacity of post installed bonded rebar in brick-aggregate concrete. In 17th World Conference on Earthquake Engineering, 17WCEE. Sendai, Japan. |
| 3. |
Kabir, R. T., Hasan, M. K., Adnan, S. M. N., Ahmed, M., Maliha, M., Barua, S., Ema, A. J., Islam, M. A., Suzuki, R., Matsukawa, K., Nakano, Y., Rahman, M. M., Amin, A. F. M. S. (2020). Tests on low strength concrete columns under axial compression and shear. In 17th World Conference on Earthquake Engineering, 17WCEE. Sendai, Japan. |
| 4. |
Nuruzzaman, A. S. M., Ema, A. J., Barua, S., Matsukawa, K., & Amin, A. F. M. S. (2020). Confined reinforced concrete bridge pier ductility under lateral load: Theoretical predictions. In IABSE-JSCE Joint Conference on Advances in Bridge Engineering-IV, Editors: Amin, Okui, Bhuiyan, Rahman (eds.). pp. 185-189. Dhaka, Bangladesh. ISBN: 978-984-34-8313-3. |
| 5. |
Amin, A. F. M. S., Uddin, M. R., & Miura, S. (2020). Applicability of weathering steel in the atmospheric conditions of Bangladesh. In IABSE-JSCE Joint Conference on Advances in Bridge Engineering-IV, Editors: Amin, Okui, Bhuiyan, Rahman (eds.). pp. 212-219. Dhaka, Bangladesh. ISBN: 978-984-34-8313-3. |
| 6. |
Choudhury, J. R., & Amin, A. F. M. S. (2019). Establishing an internationally benchmarked accreditation system for engineering education in Bangladesh. In International Symposium for Quality Assurance in Engineering Education Through Accreditation. Board of Accreditation for Engineering and Technical Education, Institution of Engineers, Bangladesh. |
| 7. |
Amin, A.F.M.S. & Okui, Y. (2015). Design, construction and maintenance of bridges in Bangladesh: In the past, present and future, Keynote Paper, Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-III, August 21-22, 2015, Dhaka, Bangladesh, pp. 57-76. DOI: 10.13140/RG.2.1.4005.8082 |
| 8. |
Choudhury, M.S.I., Tobita, R., Amin, A.F.M.S. & Matsumoto, Y. (2015). Experimental investigation on dynamic characteristics of Meghna bridge at different structural conditions, Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-III, August 21-22, 2015, Dhaka, Bangladesh, pp. 466-475. DOI: 10.13140/RG.2.1.2432.9449 |
| 9. |
Amin, A.F.M.S., Islam, M.M., Fuad, N., Choudhury, M.S.I., Hasnat, A. & Amanat, K.M. (2015). Shift in the natural frequencies of the deck of Bangabandhu Jamuna bridge due to CFRP strengthening, Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-III, August 21-22, 2015, Dhaka, Bangladesh, pp. 456-460. DOI: 10.13140/RG.2.1.3481.5204 |
| 10. |
Noor, S.T., Amin, A.F.M.S. & Khan, A.J. (2015). Numerical investigation of a counter measure to control local scour around a bridge pier: A new source of bridge vibration, Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-III, August 21-22, 2015, Dhaka, Bangladesh, pp. 204-211. DOI: 10.13140/RG.2.1.4792.2409 |
| 11. |
Amin, A.F.M.S., Amanat, K.M., Ahsan, R. & Rahmatullah, R. (2015). Renovation of two century-old steel truss railway bridges to increase the vertical clearance, Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-III, August 21-22, 2015, Dhaka, Bangladesh, pp. 561-568. DOI: 10.13140/RG.2.1.2695.0889 |
| 12. |
Amin, A.F.M.S., Amanat, K.M., Islam, M.M. & Bhuiyan, M.A.R. (2015). Structural adequacy of a deformed prestressed concrete girder in Khodarhat bridge: An assessment utilizing filed vibration data and FE computations, Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-III, August 21-22, 2015, Dhaka, Bangladesh, pp. 461-465. DOI: 10.13140/RG.2.1.1646.5122 |
| 13. |
Hasan, M.S., Okui, Y., Takai, H. & Amin, A.F.M.S. (2015). Responses from laminated rubber bearing under compression and rotation via FE analysis, Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-III, August 21-22, 2015, Dhaka, Bangladesh, pp. 340-344. DOI: 10.13140/RG.2.1.4267.9522 |
| 14. |
Amin, A.F.M.S., Hossain, M., Kabir, N., (2012). Eight-chain model and its variants for hyperelastic rubber-like materials: A comparative study, European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), University of Vienna, Austria, September 10-14, 2012. |
| 15. |
Haque, M. M., Siddiqi, M. Z. R., Rahman, M. A., Islam, M. S., Amin, A. F. M. S., & Alam, M. K., (2011). Use of selected silica deposits of Bangladesh as standard sand in testing compressive strength of hydraulic cement mortars: A proposal for strength correlation, Proceedings of the 4th Annual Paper Meet and 1st Civil Engineering Congress, 22-24 December, 2011, Dhaka, Bangladesh. pp. 8-21. |
| 16. |
Islam, M. M., Choudhury, M. S. I., Abdulla, M., & Amin, A. F. M. S., (2011). Confinement effect of fiber reinforced polymer wraps in circular and square concrete columns. Proceedings of the 4th Annual Paper Meeting and the 1st Civil Engineering Congress, 22-24 December, 2011, Dhaka, Bangladesh. pp. 359-362. |
| 17. |
Hasnat, A., Islam, M. M., & Amin, A. F. M. S., (2011). Parameters affecting the flexural capacities of reinforced concrete members strengthened with FRP strip: A critical comparison. Proceedings of the 4th Annual Paper Meeting and the 1st Civil Engineering Congress, 22-24 December, 2011, Dhaka, Bangladesh. pp. 363-370. |
| 18. |
Sobhan, M.A., Amin, A.F.M.S., (2010). Recent trend and futuristic vision of bridge development in Bangladesh, Country Paper, Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-II, August 8-10, 2010, Dhaka, Bangladesh, pp. 3-11. |
| 19. |
Bhuiyan, A.R., Nguyen, D.A., Okui, Y., Amin, A.F.M.S., (2010). Effect of modeling approaches on seismic response prediction of base isolated highway bridges, Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-II, August 8-10, 2010, Dhaka, Bangladesh, pp. 326-335. |
| 20. |
Maksud-Ul-Alam, M., Amin, A.F.M.S., (2010). Pedestrian induced vibrations in footbridges: Reappraisal of code provisions, Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-II, August 8-10, 2010, Dhaka, Bangladesh, pp. 344-351. |
| 21. |
Amanat, K.M., Amin, A.F.M.S., Hossain, T.R., Kabir, A., Rouf, M.A., (2010). Cracks in the box girders of Bongobondhu Jamuna Multipurpose Bridge-Identification of causes based on FE analysis, Proceedings of the IABSE-JSCE Joint Conference on Advances in Bridge Engineering-II, August 8-10, 2010, Dhaka, Bangladesh, pp. 451-460. |
| 22. |
Bhuiyan, A.R., Okui, Y., Razzak, M.K., Amin, A.F.M.S., (2010). Earthquake resistant design of highway bridges using laminated rubber bearings: An approach for modelling hysteretic behaviour based on experimental characterization of rheology properties, Proceedings, 3rd International Earthquake Symposium, Jointly organized by Bangladesh Earthquake Society (BES) and Bangladesh University of Engineering and Technology (BUET), Bangladesh, Dhaka, March 5-6, 2010, pp. 381-389. |
| 23. |
Amin, A.F.M.S. (2009). Production of coarse aggregates from demolished concrete via recycling: Engineering properties, strength attainment features and NDT correlations, In Environmental Challenges in the New Millennium, First Humboldt Kolleg-International Conference in Dhaka, Bangladesh in commemoration of the 150th anniversary of Alexander von Humboldt’s death, 19-21 November 2009. |
| 24. |
Amin, A.F.M.S., and Lion, A., (2009). Temperature dependence of Mullins softening-healing phenomena: An outline for theoretical description based on experiments, In G. Heinrich, M. Kaliske, A. Lion & S. Reese (eds), Constitutive Models for Rubber VI, pp. 497-503. Balkema. |
| 25. |
Amin, A.F.M.S. (2009). Recycling of concrete as coarse aggregates: Bangladesh Perspective, In Construction for a Greener World, 37th Convension of International Federation of Asian & Western Pacific Contractors’ Associations, Dhaka, Bangladesh, 4-6 March 2009. |
| 26. |
Lion, A., Amin, A.F.M.S., Okui, Y., (2007). Experimental investigation and constitutive modeling of high damping rubber, 11th International Seminar on Elastomers, “Kautschuk Gummi und Kunststoffe”, Freiburg, Germany, September, 23 – 27, 2007. |
| 27. |
Bhuiyan, A.R., Amin, A.F.M.S., Hossain, T., Okui, Y., (2007). Nonlinear viscosity law for rate-dependent response of high damping rubber: FE implementation and verification, Constitutive Models for Rubber V-Boukamel, Laiarinandrasana, Meo, Verron (eds), 2008, Taylor & Francis Group, London, ISBN 978-0-415-45442-1, pp. 274-284. Proceedings of 5th European Conference for Constitutive Models for Rubber, Paris, 4-7 September 2007. |
| 28. |
Amin, A.F.M.S., Hossain, T.R., Habib, A. (2005). Vibration serviceability requirement in the design of arch-supported suspended footbridge, Proceedings of the Japan-Bangladesh Joint Seminar on Advances in Bridge Engineering, 10 August 2005, Dhaka, Bangladesh, pp. 13-22. |
| 29. |
Shahriar, A., Amin, A.F.M.S., Ahmad, S., Hossain, M.Z., (2005). Some Thoughts on ACI Method of Concrete Mix Design, ICRAMME 05, Proceedings of the International Conference on Recent Advances in Mechanical & Materials Engineering, 30-31 May 2005, Kuala Lumpur, Malaysia, Paper No. 162. [ISBN 983-41728-2-6] |
| 30. |
Amin, A.F.M.S., and Okui, Y. (2004). High damping rubber for base isolation bearings: mechanical behavior and constitutive modeling, Proceedings of the Conference on Filler Reinforcement of Rubber held in the Geological Society, London on 14 September 2004, pp 51-57. Organised by Rubber in Engineering Committee of the Institute of Materials, Minerals and Mining, London, UK. |
| 31. |
Wiraguna, S.I., Yamada, K., Amin, A.F.M.S., and Okui, Y. (2003a). Behavior of high damping rubber in simple shear deformation, CD Proceedings of Temu Ilmiah XI, ISSN 0918-7685, pp. 41-46. |
| 32. |
Wiraguna, S.I., Yamada, K., Amin, A.F.M.S., and Okui, Y. (2003). Constitutive Model for High Damping Rubber: Experimental Facts and Mathematical Modeling, Proceedings of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Bali, Indonesia. 16 December- 18 December 2003, pp. VID 91-96. |
| 33. |
Amin, A.F.M.S., Alam, M.S. and Okui, Y. (2001). An Improved Hyperelasticity Relation For Modeling Strain Rate Dependency Of High Damping Rubber, CD Proceedings of 56th Annual Conference of Japan Society of Civil Engineers, Kyushu, Japan, October 2001. |
| 34. |
Amin, A.F.M.S., Alam, M.S. and Okui, Y. (2001). Development of Rate Dependent Constitutive Model for Elastomers, Creative Systems in Structural and Construction Engineering, Singh ed., Balkema, Rotterdam, pp. 623-628. |
| 35. |
Wadud, Z., Amin, A. F. M. S. and Ahmad, S. (2001). Voids in Coarse Aggregates: An Aspect Overlooked in the ACI Method of Concrete Mix Design, Creative Systems in Structural and Construction Engineering, Singh ed., Balkema, Rotterdam, pp. 423-428. |
| 36. |
Amin, A.F.M.S., Alam, M.S. and Okui, Y. (2001). A Constitutive Model for Simulating Viscoelastic Response from High Damping Rubber, Proceedings of 3rd International Summer Symposium, JSCE, Tokyo, Japan, August 2001. |
| 37. |
Amin, A.F.M.S., Alam, M.S. and Okui, Y. (2000). Hyperelasticity Modelling of High Damping Rubber and Finite Element Simulation, CD Proceedings of 55th Annual Conference of Japan Society of Civil Engineers, Sendai, Japan, September 2000, I-A8. |
| 38. |
Alam, M.S., Takanezawa, S., Amin, A.F.M.S. and Okui, Y. (2000). Mechanical Behaviour of Elastomers Under Compression and Its Microstructure, CD Proceedings of 55th Annual Conference of Japan Society of Civil Engineers, Sendai, Japan, September 2000, I-A9. |
| 39. |
Amin, A. F. M. S. and Ahmad, S. (1999). Thick Shell Finite Element in the Analysis of Helicoidal Star Slab, Civil and Environmental Engineering Conference (C&EEC) – New Frontiers and Challenges, 8-12 November 1999, AIT, Bangkok, Thailand, Vol. I, pp. 9-16. |
| 40. |
Amin, A. F. M. S., Ahmad, S. and Wadud, Z. (1999). Effect of ACI Concrete Mix Design Parameters on Mix Proportion and Strength, Civil and Environmental Engineering Conference (C&EEC) – New Frontiers and Challenges, 8-12 November 1999, AIT, Bangkok, Thailand, Vol. III, pp. 97-106. |
| 41. |
Amin, A. F. M. S., Ahmad, S. and Shamsuddin, S. A. J. (1998). Environment-Friendly Low Cost Housing Options for Low Income Communities, Proceedings of Conference on Low and Low Medium Cost Housing Development, July 1998, Kuching, Sarawak, Malaysia, pp. 168-182. |
| 42. |
Amin, A. F. M. S. and Ahmad, S. (1998). An Economic Design Approach for Helicoidal Stair Slabs Based on Finite Element Analysis, Advances in Civil and Structural Engineering Computing for Practice: Edited by Topping, B. H. V., Civil-Comp Press, Edinburgh, U. K., pp. 241-246. |
| 43. |
Amin, A. F. M. S., Shamsuddin, S. A. J., and Alam, M. M. (1998). Optimisation of Sewage Treatment Process at Pagla, Proceedings of the 24th WEDC International Conference, Islamabad, Pakistan, 31st August 1998 to 4th September 1998, pp 129-132. |
