Publication

  1. Choudhury, M. S. I., Amin, A. F. M. S., Islam, M. M., & Hasnat, A. (2016). Effect of confining pressure distribution on the dilation behavior in FRP-confined plain concrete columns using stone, brick and recycled aggregates. Construction and Building Materials, 102, 541–551. DOI: 10.1016/j.conbuildmat.2015.11.003
    Permalink: http://dx.doi.org/10.1016/j.conbuildmat.2015.11.003
  2. Hasnat, A., Islam, M. M., & Amin, A. F. M. S. (2016). Enhancing the debonding strain limit for CFRP-strengthened RC beams using U-clamps: Identification of design parameters. Journal of Composites for Construction, 20(1), DOI: 10.1061/(ASCE)CC.1943-5614.0000599
    Permalink: http://dx.doi.org/10.1061/(ASCE)CC.1943-5614.0000599
  3. Islam, M. M., Choudhury, M. S. I., & Amin, A. F. M. S. (2016). Dilation effects in FRP-confined square concrete columns using stone, brick, and recycled coarse aggregates. Journal of Composites for Construction, 20(1), DOI: 10.1061/(ASCE)CC.1943-5614.0000574
    Permalink: http://dx.doi.org/10.1061/(ASCE)CC.1943-5614.0000574
  4. Hossain, M., Amin, A.F.M.S., & Kabir, M.N. (2015). Eight-chain and full-network models and their modified versions for rubber hyperelasticity: a comparative study. Journal of the Mechanical Behavior of Materials, 24(1-2), 11-24.
  5. Amin, A. F. M. S., Hasnat, A., Khan, A. H., & Ashiquzzaman, M. (2016). Residual cementing property in recycled fines and coarse aggregates: Occurrence and quantification. Journal of Materials in Civil Engineering, 28(4). DOI: 10.1061/(ASCE)MT.1943-5533.0001472
    Permalink: http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0001472
  6. Nguyen, D.A., Dang, J., Okui, Y., Amin, A.F.M.S., Okada, S., & Imai, T. (2015). An improved rheology model for the description of the rate-dependent cyclic behavior of high damping rubber bearings. Soil Dynamics and Earthquake Engineering, 77, 416-431.
  7. Amin, A. F. M. S., Bhuiyan, A. R., Hossain, T., & Okui, Y. (2014). Nonlinear Viscosity Law in Finite-Element Analysis of High Damping Rubber Bearings and Expansion Joints. Journal of Engineering Mechanics.
    Permalink: http://dx.doi.org/10.1061/(ASCE)EM.1943-7889.0000888
  8. Razzaq, M. K., Okui, Y., Bhuiyan, A. R., Amin, A., Mitamura, H., & Imai, T., (2012). Application of Rheology Modeling to Natural Rubber and Lead Rubber Bearings: A Simplified Model and Low Temperature Behavior. Structural Engineering/Earthquake Engineering, JSCE, 29(2), 40-55.
  9. Hossain, M. F., Molla, M. A. I., Masum, S. M., Rana, A. A., Amin, AFMS, Chowdhury, R.S., Sultana, S., & Karim, M.M., (2012). Chemical and Sedimentological Characterization of Moulvibazar Silica Deposit of Bangladesh as Standard Sand, International Journal of Basic & Applied Sciences, IJBAS-IJENS Vol:12 No:06, 170-176.
  10. Amin, A.F.M.S., Haque, M.M., Siddiqi, M.Z.R., Rahman, M.A., Islam, M.S., & Alam, M. K., (2012) Use of selected silica deposits of Bangladesh as standard sand in testing compressive strength of hydraulic cement mortars: A proposal for strength correlation, Journal of Civil Engineering, IEB, Journal of Civil Engineering (IEB), 40 (2), 181-202.
  11. Amin, A.F.M.S., Lion, A., Hofer, P., (2010). Effect of Temperature History on the Mechanical Behavior of a Filler-Reinforced NR/BR Blend: Literature Review and Critical Experiments, Journal of Applied Mathematics and Mechanics / Zeitschrift fur Angewandte Mathematik und Mechanik, 90(5), pp. 347-369.
  12. Amin, A.F.M.S., Lion, A., Sekita, S., Okui, Y., (2006a). Nonlinear dependence of viscosity in modeling the rate-dependent response of natural and high damping rubbers in compression and shear: Experimental identification and numerical verification, Int. J. Plast., 22(9), 1610-1657.
  13. Amin, A.F.M.S., Wiraguna, S.I., Bhuiyan, A.R., Okui, Y. (2006b). Hyperelasticity model for FE analysis of natural and high damping rubbers in compression and shear, J. Engrg. Mech., ASCE, 132(1), 54-64.
    Permalink: http://dx.doi.org/10.1061/(ASCE)0733-9399(2006)132:1(54)
  14. Amin, A.F.M.S., Alam, M.S., Okui, Y. (2003). Measurement of lateral deformation of natural and high damping rubbers in large deformation uniaxial tests, J. Testing Eval., ASTM, 31(6), 524-532.
  15. Amin, A.F.M.S., Alam, M.S. and Okui, Y. (2002). An improved hyperelasticity relation in modeling viscoelasticity response of natural and high damping rubbers in compression: experiments, parameter identification and numerical verification, Mechanics of Materials, 34, 75-95.
  16. Amin, A.F.M.S., Alam, M.S. and Okui, Y. (2001). Nonlinear Viscoelastic Response of Elastomers: Experiments, Parameter Identification and Numerical Simulation, Journal of Structural Engineering, JSCE, 47A, pp. 181-192.
  17. Ahmad, S. and Amin, A.F.M.S., (1998). Effect of Curing Conditions on Compressive Strength of Brick Aggregate Concrete, Journal of Civil Engineering, Institution of Engineers, Bangladesh, Vol. CE26, No.1, pp. 37-49.
  18. Amin, A. F. M. S. (2021). Structure to Bridge Creation Hubs During the Pandemic, Editorial, Structural Engineering International, 31(1), 5. DOI: 10.1080/10168664.2021.1863652.
  19. Choudhury, M. S. I., Matsumoto, Y., & Amin, A. F. M. S. (2018). Scour depth estimation in a balanced cantilever bridge with deteriorated central hinges based on natural frequencies: Field measurements, methodology for estimation and verification. Journal of Civil Structural Health Monitoring, 8(4), 617–634. DOI: 10.1007/s13349-018-0300-9